Draft Diverters

540097 10” Draft Diverter

540097.1 8” Draft Diverter

Draft diverters are used when installing any hot water pressure washer indoors. They help induce air from the room creating a positive draft for ventilation. Order proper size based on the diameter of the exhaust discharge of the heating coil.

Blast Gates

552500 10” Blast Gate

552510 8” Blast Gate

Blast gates are used when installing any hot water pressure indoors and in climates where outside temperatures and down drafts can cause freezing of the coil while the machine is not in operation. It is also recommended to save on heating cost and cut down on drafts when the machine is not in use.

Flat Surface Cleaners

Flat Surface Cleaners are designed to attach to any pressure washer and spray the water through a spinning spray bar to thoroughly clean floors and flat surfaces. When ordering, just specify the orifice size you are currently using in your pressure washer or the model number of the machine.

This economical 13” flat surface cleaner is a great addition to any pressure washer and should be used on machines producing at least 3 gpm flow at 1500 psi. Injection molded plastic design with single handle and sturdy brush guard with dual tips. This model attaches directly to your existing wand and attaches at the twist fast coupler. Additional gun/wand # AL200 is needed if your wand is not a 2 piece wand.

526035.(tip size) 13” Flat Surface Cleaner without wheels

526036.(tip size) 13” Flat Surface Cleaner with wheels

Stainless steel construction with single handle design and sturdy brush guard with dual tips. This model attaches directly to your existing wand and attaches at the twist fast coupler. Additional gun/wand # AL200 is needed if your wand is not a 2 piece wand.

526032.(tip size) 12” Flat Surface Cleaner

526033.(tip size) 21” Flat Surface Cleaner

30” ABS plastic housing affixed to a steel sub frame with front caster wheel for maneuverability. Hands free operator valve and double braided wire hose with quick connects attached directly to your existing discharge hose when you remove the wand. This model works best on machines discharging at least 4 gallons per minute.

526028.(tip size) 30” Flat Surface Cleaner

Accessory Hoses

These pressure hoses come with twist fast adapters to hook directly to the hose that comes with your Cam Spray pressure washer.

527651 20’ Hose Kit

527650 40’ Hose Kit

527652 40’ Hot Water Hose Kit

527653 50’ Hose Kit

527660 100’ Hose Kit

Sand Blaster Attachments

Sand Blast attachments combine high pressure water and sand to remove graffiti, paint, baked on grease, rust and much more. Use dry silica sand, baking soda or washed and dried river sand.

527250 Light Duty Sand Blaster

Machine use up to 1500 PSI @ 3.0 GPM


Comes with hose, probe and sand blast head with steel orifice

527300 Medium Duty Sand Blaster

Machine use up to 3500 PSI @ 4.0 GPM


Constructed of a bronze body, steel orifice and a replaceable tungstencarbide tip. Comes with sand blast head, hose and probe with twist fast adapter to couple to end of wand.

509300 Heavy Duty Sand Blaster

Machine use up to 4000 PSI @ 4. GPM


Constructed of an aluminum body, hardened stainless steel tip and tungsten carbide sand nozzle. Comes with a sand blast head, hose and probe with a twist fast adapter to couple to end of wand.

Turbo Tips

Rotating 0 degree pattern packs a powerful punch while maintaining a 15 degree spray coverage for fast cleaning.

TS-58-2 Turbo Tip

Use with machines up to 3000 PSI, for occasional use. Specify orifice size needed or the model of Cam Spray machine you are using.

TS-58-5 Turbo Tip

Use with machines up to 4500 PSI, for heavy use on any machine. Specify orifice size needed or the model of Cam Spray machine you are using.

Order a quick coupler plug # 510060.1 if your machine uses the interchangeable tips, order a # 527700 fast plug if your machine uses the twist fast couplers to connect the tips.

Turbo Wand and Extentions

The turbo wand is a low cost alternative for the smaller machines up to 3 gallons per minute at 1500 PSI.

527208 Turbo Wand

Attaches directly to the wand after removal of your current wand-tip half. Specify orifice size needed or the model of Cam Spray machine.

Wand extensions come complete with twist fast coupler and plug for easy hook up to your gun and wand. Made of ¼” plated steel and a plastic insulator to protect hands. Good for pressures up to 4000 PSI.

527500 24” Wand Extension

509925 36” Wand Extension

509930 79” Wand Extension

509932 8’-24’ Telescoping Wand

Brush Attachments

Cam Spray offers brushes that attach to the wand of your pressure washer. Styles range from reciprocating, rotating and stationary with 24” wand extensions available for those long reach applications.

Foamer Attachment

Cam Spray offers foamers that attach to the wand of our pressure washer. When chemical is used with a foaming agent this unit will create a thick foam, applied at low pressure and will cling to surface.

Sludge Pump

This unique sludge pump is designed to be used on systems of 4 gpm or more at the operating pressure of the machine to remove sludge from pits or any location. Works great in removing leaves and sludge from ponds and fountains.

Chemicals

Cam Spray offers chemicals for road film removing and degreasing. The chemicals are designed to be safe to use and user friendly.

The Root Rat

Quick change cable and chain rotors


Compact design for versatility


Simple and user friendly


Hardened Stainless Race and Rotor


Quick Chain or Cable replacement with socket head cap pins or heavy duty cotter pins


Stainless Steel Thrust Bearing


Optional Aluminum Skid for 3/8 RR and 1/2 RR is available and aluminum ring skid is included with the 3/4 RR


3/4 RR comes with a SS Thruster for longer pulls, optional on 1/2 RR


Optional hole saw kit is available for the 1/2 RR and the 3/4 RR